F Series Mud Pump Cylinder Bimetal Liners Ceramic Liners

Product Description

Mud Pump Cylinder Liner Factory

Product Description

pump models:
EMSCO:F-1300,F-1600,FB1300,FB1600,F-800,F-1000,F-500,F-350,DB-550,DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700
IDECO: T-500, T-800, T-1000, T-1300, T-1600
NATIONAL: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350,JWS-400
GARDNER:DENVER:PZ7,PZ8/9,PZ10/11,FK-FXK,FY-FXD,FD-FXX,FG-GXG, FG-FXG,KG-KXG, FQ-FXQ, FF-FXF,FF-FXP
OILWELL: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
And other brand spare parts for Wirth,Opi,Ellis Williams,Wilson,Gaso,Skytop/Brewster.

Mud Pump Liners Model
BOMCO	F-500	F-800	F-1000	F-1300	F-1600	F-1600HL	F-1600L	F-2200HL
Hong Hua	HHF-500	HHF-800	HHF-1300	HHF-1600	3NB-1600F	5NB-1600	5NB-2400
EMSCO	F-500	F-800	F-1000	F-1300	F-1600	FD-1000	FC-2200	FB-1300
Gardner Denver	PAH	P7	P8/9	P10/11	PXL	PX-11	PZL	PY-FXD
National	7-P-50	8-P-80	9-P-100	10-P-130	12-P-160	14-P-200	14-P-220	N-1000/1300
Oilwell	A-850-PT	A-1100-PT	A-1400-PT	A-1700-PT
TSC	WF-500	WF-800	WF-1000	WF-1300	WF-1600	WF-2000	WF-2200
IDECO	T-500	T-800	T-1000	T-1300	T-1600

Mud pump parts:

Liners: Hy- chrome Mud Pump Liner, chrome-plated Liner, Hardened Steel Liner
Valve and seat: Premium Cross Arms Valve and seat, Full open Valve and seat, Valve Spring
Piston and piston rods; Long-life Bonded Piston with Rubber and Fabric, Long-Life bonded Piston with Urethane, Replacement Piston, Piston Hub, Piston Rod, Plate, Snap Ring
Other parts: Crosshead, Upper and Lower Crosshead Guide, Extension Rod, Piston Rod Clamp, Threaded Ring, Linder End Cover, Valve Pot Cover, Valve Guide, Cylinder Head, Cylinder Head Plug, Cap, Linder Seal, Valve Cover Gasket, Cylinder Head Gasket and etc.

Parts are available for these popular pump models:

BOMCO/Emsco Mud Pumps: F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, dB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,

National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220, E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,

Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG, KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,

Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT

Wirth Mud Pump: TPK1000, TPK1600, TPK 2000

Russian Pumps: UNBT-950, UNB-600, 8T-650 and so on
Ellis Williams: E-447, E-2200

And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.

Bimetal Liners
The b-metal liner is composed of two layers and fixed tightly. The outer sleeve is forged steel with abrasion resistance, it adapts the technology of centrigugal forging;  the inner sleeve is high chromium iron with wear&corrosion resistance, after heat treatment, the hardness of it can reach to a lever of 62 RC.
The bimetal liners produced by us strictly control the tolerance, assure the easy installation, inner sleeve is highly polished with abrasion&corrosive resistance, can used in various bad working environment with longer service life. 
Liner Outer Sleeve: 45#forged steel, tensile strength is σb>610MPa, yield strength is σs>450MPa, ,elongation hardness is §>17%,hardness is HRC180-200
Liner Inner Sleeve: high chromium cast iron (centrifugal forged). Annealing hardness is HRC≤40. Quenching hardness is HRC59-67
Chemical Composition:C 2.8%-3.1%  Cr 26%-28%  Si 0.6%-0.9%  Mn 0.5%-1% Mo 0.5%-0.8% S , P <0.05%;

Detailed Photos

 

OUR FACTORY 

Company Profile

 

Hebel Xinhuafa Petroleum Machinery Co. LTD was established in 2006,with 5000m2 plant. The company is engaged in product design, manufacturing and service on all the quality oilfield replacement parts, including mud pump fluid end parts including Fluid end modules, liners, pistons, valves,&seats, extension rods, piston rods, valve covers etc. The company holds a professional technical team and is equipped with advanced machineries,improving the technical skills and updating product quality, Our products are certified by ISO9001 quality control. We supply products not only our oilfields company of domestic, but also dozens of countries all over the world, such as USA, Russia, Indonesia and Iran. We supply mud pump spare parts like mud pump liner including zirconia ceramic liner and high chrome bimetallic liner, Mono-metal Liner, fluid end module, valve and seats, piston, piston rod, pony rod etc. parts for mud pump, we can also customize and machine as your drawing.

Certifications

Packaging & Shipping

FAQ

1. Do you have OEM service? Do you supply the parts? 

Yes, we do, as long as you provide us your drawing and detailed requirements.
 

2. How can we easily find out the most fit centrifuges? 

We have experienced engineer team to help you make the model selection, as long as you proide us the detailed processing material characteristics. 

 

3. Will you dispatch technicians for installation and commissioning? 

Yes, we can, we do lots of service, please refer to our after sales part. 

 

4. What is your advantage compared with your competitors? 

Quality and experience. We are the top centrifuge supplier in China, our designs and structures are similar to world leader , Westfaliar, Flottweg etc. 

 

5. How do you protect the quality? 

My factory is a state owned enterprise with more than 100 years experience, strict operation policy is performed, advanced processing machines guarantee the precision of all components, workers with operation license, parts get multiprocessing, transmission&electrical parts are of international famous brand. Series of test and inspection are done in the whole producing stage. 

 

6. Can we visit your end user or contact them? 

Yes,users are in domestic and abroad, we can provide you the name list. You can go there or contact to get more info.